Piccola

Hi-Tech Rotary Tablet Press for Research & Development.

The PICCOLA is a rotary tablet press with a super compact design, developed for R&D plants or small production batches. Its configuration allows the operation of 1-10 punch sets, fited in the head. Dies and punches are compatible with B or D series according to TSM or EU standards, which enables the employment of the same punches used in production.

• Easy compression of oblong tablets up to 25 x 10 mm
• Accepts any format within a 22 mm diameter
• Can be used either with forced or gravity feeder
• Pre-compression system
• Independent weight and hardness adjustments
• Mechanical relief in case of overcharge
• Damped electronic clutch
• Possible implementation for pressing cycle control through a multiple software PC  according to needs. Software designed for Galenic Development and Production Control
• Compression force regulation carried out by mechanical device, through flexible washers
• Speed regulation controlled from the control panel by a frequency inverter
• Manual lubrication
• Quick format change and cleaning
• Designed according to GMP standards; surfaces treated with hard chrome or stainless steel, quality AISI 316
• Eight safety interlocked doors allow easy access to all parts.

Model	B - 10	D - 8
Tooling TSM or EU	B	D
Maximum tablet diameters	16 mm	22 mm
Number stations	10	8
Output	2.000/30.000	2.000/24.000
Compression force max.	60 KN	60 KN
Upper punch penetration	0-6 mm	0-6 mm
Depth of fill	17 mm	17 mm
Pitch diameter	150 mm	150 mm
Power consumption	2 KW	2 KW
Net weight	295 Kg	295 Kg
Gross weight	360 Kg	360 Kg